IntermediaterespiratoryPhysiology

Lung Compliance: How Easily the Lungs Stretch

Overview

Compliance is the stretchiness of the lungs: the volume change per unit pressure change, normally ~200 mL/cmH2O. It reflects elastic tissue and surface tension - surfactant keeps it high, fibrosis lowers it, emphysema raises it pathologically. Compliance determines the work of breathing and, with resistance, sets the time course of each breath.

Learning objectives

  • Define compliance and state its normal value
  • Identify the two determinants: elastic tissue and surface tension
  • Explain how fibrosis decreases compliance
  • Explain how emphysema increases compliance
  • Relate compliance to the work of breathing

Process steps

1
Define the measurement

Compliance = change in volume divided by change in pressure (ΔV/ΔP). A highly compliant lung inflates a lot for a small pressure change; a stiff lung needs large pressures for small volumes.

2
Elastic fibers provide recoil

Elastin and collagen fibers in alveolar walls stretch during inflation and recoil during expiration. Their properties set the tissue component of compliance - stretchy elastin for easy inflation, inextensible collagen as the limit.

3
Surface tension adds stiffness

Alveolar surface tension accounts for roughly two-thirds of elastic recoil; surfactant keeps this component low and compliance high. Lose surfactant and compliance plummets.

4
Fibrosis stiffens the lung

Scar tissue replaces elastic fibers with rigid collagen: compliance falls, inflation needs high pressures, and breathing becomes rapid and shallow (small volumes cost less work when stiff).

5
Emphysema over-complies

Destruction of alveolar walls removes elastic tissue: compliance rises pathologically, but recoil vanishes - the lungs hyperinflate and expiration, normally passive, becomes labored and incomplete, trapping air.

6
Work follows compliance

Low compliance (fibrosis) makes inflation expensive; high compliance with lost recoil (emphysema) makes deflation expensive. Normal compliance minimizes total work at resting breathing patterns.

Key variables

VariableUnitTypical rangeRole
Normal lung compliancemL/cmH2OAbout 200Volume change per cmH2O pressure change
Surface tension sharepercent of recoilAbout two-thirdsWhy surfactant is critical to compliance
Fibrotic compliancedirectionDecreasedStiff lungs need high inflation pressures
Emphysematous compliancedirectionIncreasedFloppy lungs lose expiratory recoil
Chest-wall compliancemL/cmH2OAbout 200Similar to lungs; total system ~100

Feedback loops

Fibrosis breathing pattern negative feedback

  1. Compliance falls
  2. Deep breaths become very costly
  3. Breathing turns rapid and shallow
  4. Work is minimized at small volumes

Emphysema air trapping positive feedback

  1. Elastic recoil is lost
  2. Expiration cannot fully empty the lungs
  3. Residual volume grows; chest hyperinflates
  4. Breathing efficiency worsens progressively

Compliance defined

ΔV/ΔP: how much volume a given pressure buys. Normal lungs accept ~200 mL per cmH2O - so a quiet 500 mL breath needs only ~2.5 cmH2O of elastic pressure. Elastance is the reciprocal (stiffness). Clinicians feel compliance every time they squeeze a ventilation bag: stiff lungs resist, floppy lungs accept too easily.

Normal value

Lung compliance ~200 mL/cmH2O. Below ~100 suggests stiffening disease; far above suggests recoil loss.

Two determinants

Elastic fibers (tissue recoil, ~one-third) and surface tension (~two-thirds, tamed by surfactant). This split explains two classic stiff-lung scenarios: fibrosis attacks the fibers, surfactant loss (RDS, ARDS) unleashes surface tension - same low compliance, different culprits.

Pressure-volume curves

Compliance is the slope of the lung's pressure-volume curve; fibrosis flattens it, emphysema steepens it.

Fibrosis: too stiff

Collagen scarring replaces elastic tissue: compliance falls, so each milliliter costs more pressure. Patients adopt rapid shallow breathing - the work-minimizing pattern for stiff lungs - but shallow breaths waste ventilation on dead space, a cruel trade-off.

Educational only

Interstitial lung diseases are clinical conditions; this lesson covers the mechanical principle.

Emphysema: too floppy

Alveolar wall destruction removes elastic recoil: compliance rises, but the lung cannot spring back. Expiration becomes active and incomplete, air traps, and the chest hyperinflates into a barrel shape. High compliance here is pathology, not health - recoil, not just stretchiness, is what breathing needs.

Compliance and work

Total work of breathing is minimized at normal compliance with resting patterns. Disease shifts the optimum: stiff lungs favor fast-shallow, floppy lungs favor slow-deep (prolonged exhalation). The spontaneous patterns patients adopt are the body's work-minimizing solutions - physiology visible at the bedside.

Key points

  • Compliance = ΔV/ΔP, normally ~200 mL/cmH2O.
  • Determinants: elastic fibers (~1/3 of recoil) and surface tension (~2/3).
  • Fibrosis lowers compliance; emphysema raises it while destroying recoil.
  • Stiff lungs favor rapid shallow breathing; floppy lungs trap air.
  • Surfactant is essential to normal compliance.

Common misconceptions

✗ Myth: Higher compliance is always better

✓ Truth: Emphysema raises compliance but destroys recoil, making expiration labored and trapping air. Healthy breathing needs balanced compliance AND recoil.

✗ Myth: Compliance and elasticity are unrelated

✓ Truth: They are reciprocals: compliance is stretchiness (ΔV/ΔP), elastance is stiffness (ΔP/ΔV). High compliance means low elastance.

✗ Myth: Only lung tissue determines compliance

✓ Truth: Surface tension contributes ~two-thirds of recoil. Surfactant loss stiffens lungs as surely as fibrosis does.

Practice questions

Q1. Normal lung compliance is approximately:
  1. 20 mL/cmH2O
  2. 200 mL/cmH2O
  3. 2000 mL/cmH2O
  4. 2 mL/cmH2O
Answer: B.

~200 mL/cmH2O: a quiet 500 mL breath needs only ~2.5 cmH2O of elastic pressure.

Q2. Pulmonary fibrosis decreases compliance because:
  1. Surfactant increases
  2. Scar collagen replaces elastic fibers
  3. Airways dilate
  4. The diaphragm weakens
Answer: B.

Rigid scar tissue replaces stretchy elastin, so more pressure is needed per unit volume.

Q3. In emphysema, compliance is increased but breathing is impaired because:
  1. The airways are too wide
  2. Elastic recoil is lost, impairing expiration
  3. Surfactant is excessive
  4. The chest wall stiffens
Answer: B.

Destroyed alveolar walls remove recoil: lungs hyperinflate and expiration becomes incomplete, trapping air.

Q4. About what share of lung elastic recoil comes from surface tension?
  1. About 10%
  2. About one-third
  3. About two-thirds
  4. About 100%
Answer: C.

Surface tension accounts for ~two-thirds of recoil - which is why surfactant is so critical to compliance.

Click a question to reveal the answer and explanation.

Frequently asked questions

What is lung compliance?

The volume change produced by a given pressure change (ΔV/ΔP), normally ~200 mL/cmH2O. It measures how easily the lungs stretch during inflation.

Why does fibrosis cause rapid shallow breathing?

Stiff, low-compliance lungs make deep breaths very expensive in pressure/work. Rapid shallow breathing minimizes work per minute - the optimal pattern for stiff lungs, though it wastes dead-space ventilation.

Why is emphysema's high compliance a problem?

The extra 'stretchiness' comes from destroyed elastic tissue, so recoil is lost. Lungs hyperinflate, expiration becomes incomplete and labored, and air traps progressively.

How does surfactant affect compliance?

By taming surface tension - which causes ~two-thirds of elastic recoil - surfactant keeps compliance high. Its loss (prematurity, ARDS) makes lungs stiff and hard to inflate.