FoundationsnervousPhysiology

The Action Potential: How Neurons Fire

Overview

The action potential is the neuron's long-distance signal: a rapid, all-or-none reversal of the membrane voltage that races down the axon without fading. Triggered when depolarization reaches threshold, it unfolds through a precise choreography of voltage-gated sodium and potassium channels. Mastering its phases is essential, because every thought, sensation, and movement in the nervous system is carried by these brief electrical spikes.

Learning objectives

  • List the phases of the action potential in order.
  • Explain the roles of voltage-gated Na+ and K+ channels in depolarization and repolarization.
  • Define threshold, the all-or-none principle, and absolute vs relative refractory periods.
  • Describe how myelin and axon diameter affect conduction speed.

Process steps

1
Graded depolarization reaches the axon hillock

Synaptic inputs summate at the axon hillock. If the combined depolarization reaches about -55 mV, threshold is crossed and the action potential begins.

2
Voltage-gated Na+ channels open

Threshold depolarization opens activation gates on voltage-gated Na+ channels. Na+ floods inward down its electrochemical gradient in a positive-feedback cycle.

3
Membrane depolarizes to about +30 mV

The explosive Na+ influx drives the membrane potential rapidly upward past 0 mV to a peak near +30 mV, briefly reversing the membrane polarity.

4
Na+ channels inactivate; K+ channels open

Inactivation gates close the Na+ channels while slower voltage-gated K+ channels open, so Na+ entry stops and K+ begins rushing out of the cell.

5
Repolarization restores negativity

K+ efflux drives the membrane potential back down toward rest. Slow K+ channel closing causes a brief hyperpolarizing undershoot below -70 mV.

6
Refractory period passes; gradients restored

Na+ channels reset from inactivation, the Na+/K+ pump restores ion gradients, and the membrane returns to -70 mV, ready to fire again.

Key variables

VariableUnitTypical rangeRole
Threshold potentialmV~-55The depolarization level that triggers the positive-feedback opening of voltage-gated Na+ channels.
Peak of action potentialmV~+30Maximum depolarization, limited by Na+ channel inactivation; identical for every spike (all-or-none).
Absolute refractory periodms~1-2Window when inactivated Na+ channels prevent any new spike; sets maximum firing rate and one-way conduction.
Conduction velocitym/s~0.5-120Speed of propagation; fastest in large-diameter myelinated axons using saltatory conduction.

Threshold: the point of no return

A neuron fires only when depolarization at the axon hillock reaches threshold, about -55 mV. Below threshold, small depolarizations (graded potentials) simply fade away. At threshold, enough voltage-gated Na+ channels snap open that Na+ influx overwhelms K+ efflux, and a self-reinforcing cycle begins: depolarization opens more Na+ channels, which causes more depolarization. This positive feedback makes the rising phase explosive and guarantees the all-or-none principle: a neuron either fires a full-sized action potential or does not fire at all.

Depolarization: sodium rushes in

During the rising phase, voltage-gated Na+ channels open rapidly and Na+ floods into the axon down its steep electrochemical gradient. The membrane potential shoots from -70 mV past 0 and peaks near +30 mV, briefly making the inside positive. The peak is self-limiting because the Na+ channels contain inactivation gates that slam shut within a fraction of a millisecond, even while the membrane is still depolarized. No further Na+ can enter until these gates reset, which is the molecular basis of the refractory period.

All-or-none

A stronger stimulus does not make a bigger action potential. It increases the frequency of firing instead. Information is coded in spike rate, not spike size.

Repolarization and hyperpolarization

As Na+ channels inactivate, slower voltage-gated K+ channels open and K+ rushes out of the cell, driving the membrane potential back down toward rest: this is repolarization. Because the K+ channels are slow to close, K+ keeps leaving a little too long and the membrane briefly overshoots below -70 mV, a phase called hyperpolarization or the undershoot. The Na+/K+ pump then quietly restores the ion gradients, and the membrane settles back to its resting value, ready to fire again.

Refractory periods keep signals one-way

During the absolute refractory period (roughly the first 1-2 ms), inactivated Na+ channels cannot reopen no matter how strong the stimulus, so a second action potential is impossible. This sets the maximum firing rate and, crucially, prevents the signal from traveling backward. During the relative refractory period that follows, most Na+ channels have reset but K+ efflux is still high, so only an unusually strong stimulus can trigger another spike. Together these periods enforce one-way propagation down the axon.

Propagation: local currents and saltatory conduction

The action potential does not travel like a thrown ball; it is regenerated at each patch of membrane. Na+ entering during the spike spreads by local current flow to the next segment, depolarizing it to threshold and triggering a fresh action potential there. In myelinated axons, this regeneration happens only at the nodes of Ranvier, so the signal appears to jump from node to node, a fast mode called saltatory conduction. Myelin plus larger axon diameter means faster conduction, up to about 120 m/s in the fastest fibers.

From spike to synapse

When the action potential arrives at the axon terminals, its depolarization opens voltage-gated Ca2+ channels, and the resulting calcium influx triggers neurotransmitter release. In this way the electrical language of the axon is translated into the chemical language of the synapse. The fidelity of the whole chain depends on the action potential arriving full-sized every time, which is exactly what the all-or-none mechanism guarantees.

Key points

  • Threshold is about -55 mV; reaching it triggers an all-or-none spike.
  • Depolarization is driven by voltage-gated Na+ influx; repolarization by K+ efflux.
  • Na+ channel inactivation creates the absolute refractory period.
  • Signal strength is coded by firing frequency, not spike amplitude.
  • Myelinated axons use saltatory conduction at the nodes of Ranvier for speed.

Common misconceptions

✗ Myth: A stronger stimulus produces a larger action potential.

✓ Truth: Action potentials are all-or-none: every spike peaks near +30 mV regardless of stimulus strength. Stronger stimuli increase the frequency of spikes, not their size.

✗ Myth: Sodium keeps flowing in until the membrane repolarizes.

✓ Truth: Voltage-gated Na+ channels inactivate within a fraction of a millisecond at the peak. Repolarization is driven by K+ leaving, not by Na+ stopping on its own.

Practice questions

Q1. During the depolarization phase of the action potential, the membrane potential rises because:
  1. K+ flows out of the cell
  2. Na+ flows into the cell
  3. Cl- flows into the cell
  4. Ca2+ flows out of the cell
Answer: B.

Depolarization is caused by voltage-gated Na+ channels opening and Na+ rushing in down its electrochemical gradient, driving the membrane from -70 mV toward +30 mV.

Q2. The absolute refractory period is caused by:
  1. Slow K+ channels staying open
  2. Inactivated voltage-gated Na+ channels
  3. The Na+/K+ pump reversing
  4. Closed leak channels
Answer: B.

Na+ channel inactivation gates close at the peak of the spike and cannot reopen until the membrane repolarizes, making a second action potential impossible during the absolute refractory period.

Q3. Saltatory conduction occurs in:
  1. Unmyelinated axons only
  2. Myelinated axons at nodes of Ranvier
  3. Dendrites
  4. Cell bodies
Answer: B.

In myelinated axons, voltage-gated channels are concentrated at the nodes of Ranvier, so the action potential is regenerated node to node, which is much faster than continuous propagation.

Click a question to reveal the answer and explanation.

Frequently asked questions

Why can't an action potential travel backward?

The segment just behind the spike is in its absolute refractory period with inactivated Na+ channels, so it cannot be re-excited. The signal can only move forward into recovered membrane.

What limits how fast a neuron can fire?

The absolute refractory period, about 1-2 ms, caps firing at roughly 500-1000 spikes per second. Most neurons fire far below this maximum in practice.

How is the signal restored to full size along a long axon?

It is regenerated, not passively conducted. Local currents depolarize the next segment to threshold, triggering a brand-new full-sized action potential at each point along the way.