FoundationsfoundationsLesson
Measurement and Units in A&P
Overview
Physiology runs on numbers — and on the units attached to them. A&P uses metric (SI) units for length, mass, and volume, plus clinical conventions like mmHg for blood pressure and mg/dL for blood chemistry. This lesson teaches the units you will meet, how to convert between them, and how to read them without errors.
Learning objectives
- Name the SI base units for length, mass, time, and volume used in A&P.
- Convert between common metric prefixes (milli-, micro-, kilo-).
- Interpret clinical units: mmHg, mg/dL, mEq/L, and beats per minute.
- Avoid common unit errors in reading physiological data.
The metric foundation
Science uses the International System of Units (SI). In A&P the essentials are: meter (m) for length, kilogram (kg) for mass, second (s) for time, and the liter (L) — technically not SI base but universal in medicine — for volume. Temperature is reported in degrees Celsius in clinical work. Metric prefixes scale these: milli- (10⁻³), micro- (10⁻⁶), kilo- (10³), and centi- (10⁻²) cover nearly everything from cell diameters (micrometers) to body mass (kilograms).
kilo- (×1000) → base → milli- (÷1000) → micro- (÷1,000,000). Moving one step = shifting the decimal three places (except centi-).
Length, mass, and volume in the body
Cells are measured in micrometers (µm) — a red blood cell is about 7-8 µm across. Organs use centimeters; body height uses meters or centimeters. Mass: drug and hormone quantities use milligrams (mg) or micrograms (µg); body mass uses kilograms. Volume: the milliliter (mL) equals the cubic centimeter (cm³) — 1 mL = 1 cm³ — a handy identity for injections and organ volumes, while blood volumes and ventilation use liters.
Pressure, concentration, and rates
Blood pressure is reported in millimeters of mercury (mmHg), a historical unit from mercury manometers, as systolic over diastolic (e.g., written 120/80 mmHg). Respiratory pressures use cm H₂O. Concentrations appear as mg/dL (milligrams per deciliter, common for glucose and cholesterol) or mmol/L and mEq/L for electrolytes. Rates pervade physiology: heart rate in beats/min, breathing in breaths/min, urine output in mL/hour, and cardiac output in L/min.
Electronic monitors could use kilopascals, but a century of clinical thresholds, guidelines, and training is recorded in mmHg, so medicine keeps it.
Conversions without tears
Convert by tracking units, not memorizing magic: 1 kg = 1000 g; 1 g = 1000 mg; 1 mg = 1000 µg. 1 L = 1000 mL; 1 mL = 1 cm³. 1 m = 100 cm = 1000 mm. For mg/dL to g/L, note a deciliter is 0.1 L, so 100 mg/dL = 1 g/L. Write every conversion as a fraction equal to 1 (e.g., 1000 mg / 1 g) and cancel units — if the units do not cancel to what you want, the setup is wrong.
Confusing mg with µg is a thousand-fold error. Always check the prefix before calculating or interpreting a dose or lab value.
Key points
- A&P uses SI units: meters, kilograms, seconds, liters, degrees Celsius.
- Metric prefixes: kilo- (10³), milli- (10⁻³), micro- (10⁻⁶); 1 mL = 1 cm³.
- Blood pressure is reported in mmHg as systolic/diastolic.
- Concentrations use mg/dL or mmol/L; rates use per-minute or per-hour forms.
- Convert with unit-cancelling fractions; verify the prefix (mg vs. µg) every time.
Common misconceptions
✓ Truth: They are identical: 1 mL = 1 cm³ exactly, which is why syringes are marked in both.
✓ Truth: They measure the same thing (pressure) but on different scales — 1 mmHg ≈ 0.133 kPa — so values must be converted, not just relabeled.
✓ Truth: A number without units is meaningless in physiology, and unit errors (mg vs. g) are among the most dangerous mistakes in health care.
Practice questions
Q1. A red blood cell about 7.5 µm across is equal to how many millimeters?
- 7.5 mm
- 0.75 mm
- 0.0075 mm
- 75 mm
Micro- means 10⁻⁶, so 7.5 µm = 7.5 × 10⁻⁶ m = 0.0075 mm. Moving from micro to milli shifts the decimal three places.
Q2. 2500 mg is equal to:
- 2.5 g
- 25 g
- 0.25 g
- 250 g
1000 mg = 1 g, so 2500 mg = 2.5 g. Dividing by 1000 moves the decimal three places left.
Q3. Blood pressure in clinical practice is reported in:
- Kilopascals only
- Millimeters of mercury (mmHg)
- Atmospheres
- Pounds per square inch
By long clinical convention, blood pressure is recorded in mmHg (systolic/diastolic), inherited from mercury manometers.
Q4. 3.2 L expressed in milliliters is:
- 32 mL
- 320 mL
- 3200 mL
- 0.0032 mL
1 L = 1000 mL, so 3.2 L = 3200 mL. Multiplying by 1000 moves the decimal three places right.
Click a question to reveal the answer and explanation.
Frequently asked questions
What does '120/80 mmHg' actually mean?
It is shorthand for a systolic pressure of 120 millimeters of mercury over a diastolic pressure of 80 — the peak and trough of arterial pressure during the cardiac cycle, measured against the height of a mercury column in the original instruments.
How do I convert mg/dL to g/L?
Since 1 dL = 0.1 L, multiply mg/dL by 0.01: 100 mg/dL = 1 g/L. Setting it up as unit fractions and cancelling is the reliable method.
What is a micromole vs. a microgram?
A microgram (µg) is a mass (10⁻⁶ g). A micromole (µmol) is an amount of substance (10⁻⁶ mol) — they convert via molecular weight, not directly.
Why are cell sizes given in micrometers?
Because cells are thousandths of a millimeter across — a red blood cell at 7-8 µm would be 0.007-0.008 mm, an awkward scale for discussion.