Advanceddeep divesArticle
The Action Potential: From Rest to Recovery
Learning objectives
- Explain how the resting membrane potential of about -70 mV is established and maintained.
- Describe the sequence of voltage-gated channel events from threshold through depolarization, repolarization, and hyperpolarization.
- Distinguish absolute from relative refractory periods and explain their physiological purpose.
- Explain how myelination and saltatory conduction increase conduction velocity.
- Contrast the neuronal action potential with the cardiac action potential and its plateau phase.
The Resting Membrane: Why -70 mV?
Every excitable cell sits at a negative resting membrane potential - about -70 mV in a typical neuron - and that voltage is no accident. Two forces build it. First, the membrane is far more permeable to potassium than to sodium at rest, because potassium leak channels stay open; K+ drifts out down its concentration gradient, carrying positive charge away and leaving the interior negative. Second, the sodium-potassium ATPase tirelessly pumps 3 Na+ out for every 2 K+ in, which both sustains the ion gradients and adds a small direct electrogenic contribution.
The resting value sits near (but not exactly at) the potassium equilibrium potential of about -90 mV, because a slight sodium leak drags it a little positive. This resting potential is stored energy: a steep electrochemical gradient across a thin membrane, ready to discharge. Everything that follows - the spike, the refractory period, the propagation - is the controlled release and restoration of that gradient.
Threshold and the All-or-None Law
A stimulus depolarizes a patch of membrane by opening ligand-gated or mechanically gated channels. Small depolarizations are graded: they spread passively, decay with distance, and fade within a millimeter or two. But if depolarization reaches threshold - about -55 mV - voltage-gated sodium channels snap open and positive feedback takes over: Na+ entry depolarizes the membrane further, which opens more Na+ channels, which admits more Na+.
The result obeys the all-or-none law. A suprathreshold stimulus always produces a full-sized action potential; a subthreshold stimulus produces none. Stronger stimuli do not make bigger spikes - they make more frequent spikes. Information in the nervous system is therefore encoded in firing frequency and in which neurons fire, not in spike amplitude.
Depolarization: The Sodium Rush
Once threshold is crossed, voltage-gated Na+ channels open explosively and sodium floods in down its steep electrochemical gradient. The membrane potential rockets from -55 mV toward the sodium equilibrium potential of about +60 mV, typically overshooting to around +30 mV before the channels slam shut. This rising phase lasts roughly 0.5 milliseconds - one of the fastest biological events known.
Crucially, each sodium channel has two gates: an activation gate that opens with depolarization and an inactivation gate that plugs the channel a fraction of a millisecond later. Inactivation is what ends the sodium influx even while the membrane is still depolarized, and it cannot be removed until the membrane repolarizes - a detail that underlies the absolute refractory period.
Repolarization and Hyperpolarization: Potassium Takes Over
Repolarization is driven by potassium. Voltage-gated K+ channels - slower to open than their sodium counterparts - finally swing open near the peak of the spike, and K+ pours out down its electrochemical gradient, dragging the membrane potential back down. Meanwhile the inactivated Na+ channels stay shut, so nothing opposes the potassium efflux.
Because the voltage-gated K+ channels are slow to close, potassium keeps leaving even after the resting potential is reached, driving the membrane to about -90 mV - a transient hyperpolarization, or undershoot. The leak channels and the Na+/K+ ATPase then quietly restore the -70 mV resting state, though the pump's direct contribution to each spike's recovery is small; the gradients it maintains do the real work.
Refractory Periods: The Neuron's Mandatory Pause
For about 1 to 2 milliseconds after a spike begins, no stimulus - however strong - can trigger another action potential. This is the absolute refractory period, and it exists because the voltage-gated Na+ channels are inactivated; they physically cannot reopen until repolarization removes the inactivation plug. It sets a hard ceiling on firing rate (roughly 500 to 1000 spikes per second) and, just as importantly, it guarantees one-way propagation: the patch of membrane just behind the advancing spike is refractory, so the signal cannot turn around.
The relative refractory period follows, lasting until hyperpolarization fully resolves. During it, a stronger-than-normal stimulus can fire the cell, because some Na+ channels have recovered while K+ efflux still opposes depolarization. This is when stimulus intensity gets translated into firing frequency.
An action potential cannot propagate backward because the membrane it just left is in its absolute refractory period. Directionality in axons is enforced not by anatomy but by the inactivation state of sodium channels.
Speed: Myelin and Saltatory Conduction
In an unmyelinated axon, the action potential must be regenerated at every patch of membrane - continuous conduction - which is reliable but slow (around 0.5 to 2 m/s). Myelinated axons use a smarter strategy. Schwann cells (periphery) or oligodendrocytes (CNS) wrap the axon in insulating myelin, leaving bare gaps called nodes of Ranvier packed with voltage-gated channels.
The spike effectively jumps from node to node - saltatory conduction - because the insulated internode conducts the depolarizing current passively and almost instantaneously to the next node, where the full spike is regenerated. Conduction velocity rises with axon diameter and myelination, reaching up to about 120 m/s in large myelinated fibers. Diseases that strip myelin, such as multiple sclerosis, slow or block conduction precisely because this mechanism fails.
The Cardiac Action Potential: A Longer Story
Ventricular muscle cells fire a dramatically different action potential, lasting 200 to 300 milliseconds instead of 1 to 2. After the rapid upstroke (phase 0, Na+ influx), a brief notch of repolarization (phase 1) gives way to phase 2 - the plateau - where slow L-type calcium channels stay open and inward Ca2+ current balances outward K+ current, holding the membrane depolarized near 0 mV for about 200 ms. Repolarization (phase 3) follows as Ca2+ channels close and K+ efflux dominates, with phase 4 the resting state.
The plateau has two profound consequences. First, the calcium entering during phase 2 triggers calcium-induced calcium release from the sarcoplasmic reticulum - the very signal that couples excitation to contraction. Second, the long plateau extends the absolute refractory period across nearly the whole contraction, which is why cardiac muscle cannot be tetanized: the heart must relax between beats or it cannot fill.
Key points
- Resting potential (~-70 mV) reflects high resting K+ permeability plus the 3 Na+/2 K+ ATPase maintaining the gradients.
- Threshold (~-55 mV) triggers positive feedback through voltage-gated Na+ channels; spikes are all-or-none, with intensity coded as frequency.
- Depolarization peaks near +30 mV as Na+ floods in; Na+ channel inactivation then ends the influx.
- Repolarization is K+ efflux through slow voltage-gated K+ channels; their delayed closing causes transient hyperpolarization (~-90 mV).
- The absolute refractory period (Na+ channels inactivated) caps firing rate and enforces one-way propagation.
- Myelin enables saltatory conduction between nodes of Ranvier, reaching ~120 m/s in large fibers.
- The cardiac action potential's calcium-driven plateau (~200 ms) couples excitation to contraction and prevents tetanus.
- Pacemaker cells lack a stable resting potential - funny current and Ca2+ channels drive their automatic rhythmicity.
Common misconceptions
✓ Truth: Sodium entry causes the upstroke; recovery is potassium's job. K+ efflux repolarizes the membrane, and the Na+/K+ ATPase slowly rebuilds the gradients behind the scenes. Confusing the two is the most common error students make.
✓ Truth: Spikes are all-or-none: suprathreshold stimuli all produce identically sized action potentials. Stronger stimuli increase firing frequency, recruit more neurons, or both - never spike height.
✓ Truth: Nothing flows down the axon. Each patch of membrane regenerates the spike locally by opening its own channels; the signal is a self-propagating wave of channel openings, which is why it does not weaken with distance.
✓ Truth: Insulation helps, but the real trick is saltatory: the spike jumps node to node, regenerated only where channels are clustered. Fewer regeneration steps per unit distance means far greater speed.
Frequently asked questions
Why is the resting potential negative instead of positive?
At rest the membrane is most permeable to K+, which leaks out down its concentration gradient and carries positive charge with it. The Na+/K+ ATPase sustains the gradients (3 Na+ out, 2 K+ in). The interior ends up about 70 mV negative relative to the exterior.
What physically stops the membrane from reaching +60 mV?
Two things: voltage-gated Na+ channels inactivate within a fraction of a millisecond, cutting off influx, and slower voltage-gated K+ channels open to drive repolarization. The peak typically stalls around +30 mV.
Why can't cardiac muscle undergo tetanus like skeletal muscle?
The cardiac plateau phase keeps the membrane depolarized for ~200 ms, so the absolute refractory period lasts nearly as long as the contraction itself. A second stimulus simply cannot fire until relaxation is underway - the heart is forced to beat rhythmically.
How does local anesthetic block pain signals?
Local anesthetics bind voltage-gated Na+ channels and prevent them from opening. Without Na+ influx, threshold can never trigger the positive-feedback upstroke, so action potentials cannot initiate or propagate past the blocked region.
What is the funny current in pacemaker cells?
The funny current (If) is an inward Na+/K+ current through HCN channels that opens on hyperpolarization - the opposite of most voltage-gated channels. It drives the slow diastolic depolarization that makes SA node cells fire automatically, setting the heart's rhythm.